CLEAN CAL

To reduce boiler noise due to limescale. To remove and prevent incrustations caused by limescale

How to use

Add TOPTHERM CLEAN CAL to the system from whatever part of it using INJET vessel. It removes and prevents formation of limescale (if not caused by significant leaks) and has an anti-noise effect. The product must not be drained from the system. Add it with the inhibitor TOPTHERM PROTECT 1.
• REDUCES NOISE
• HELPS IN ENERGY SAVING
• MAXIMIZES SYSTEM EFFICIENCY

Usage

Add 0,5 kg of CLEAN CAL for every 100 litres of water in the system (houses from 80 up to 100 m²). Lower concentrations do not yield satisfactory results. Any higher concentration do not cause problems.

Environmental and safety information

TOPTHERM CLEAN CAL has a neutral pH and it is not classified as hazardous substance. It does not corrode metals (iron- aluminium- copper) nor plastics. Do not mix with other chemicals. Do not allow the product to reach potable waters. Do not ingest. Do not dispose of waste through the environment.

EQUIPMENT

INJET
Container pressurizable up to 2 bar provided with plastic link pipe used to introduce TOPTHERM products into thermal systems.
FIND MORE

DOWNLOAD

TUTORIAL – STEP BY STEP

Filling operation
• Before administration, ensure that the system does not contain other chemicals than TOPTHERM. If in doubt, drain the system and refill it with clean mains water.
• It is possible to add the inhibitor PROTECT 1 together with CLEAN CAL.
• Check the water volume inside the system or the house dimensions.
• Ensure to have the right quantity of CLEAN CAL available (lower concentrations than the recommended do not yield satisfactory results. Any higher concentration do not cause problems.)
• Add the product to the pressurisable INJET vessel.
• Connect the INJET joint to a radiator valve, to the jolly-valve, or to the safety-valve of the boiler and add the product inside the system.
• The product has a permanent effect and does not need to be drained.
• If the system should be drained, it is necessary to replenish it with the product.